Applicable range  

  SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655) CS and ED

  SM cord 4-14µm, MM cord 50,62.5µm ; 125µm outer diameter (standard)

  Fiber cleaved length: 16mm

Average splicing loss: 0.01dB MM/0.02dB SM (standard measure)

Typical splicing time: 9s, typical heating time:60s, return loss > 60dB

Heater    Inner heater, optional outer heater, can heat 4 protecting sleeves at same time

Heater time is 30 seconds

Appearance:  172mm(length) x180mm (width) x150mm (height)

  Screen:       5 inches LCD Monitor             Weight:  4.6Kg

  Work mode

Program/Splicing/Heating: Automation or manual optionally

Storage of splicing result: The last 5000 results to be stored in the internal memory

RS 232 interface: Connect with computer for transmitting data, printing and storage

  Environment

Temperature: -10～50℃                    Storage:-40～60℃

  Humidity: <95%RH (without dew)            Storage humidity: without dew

Work altitude: 0~4000 meters

Max. wind velocity of 15m/s

Power supply

Alternating Current: 220V+15% 50Hz  30W      Direct current:10～13V   25W 

Inner Li-ion battery and AC adaptor